Is fire alarm monitoring worth it?

Alex R.

Completed Emergency Sprinkler Service Call

Alex R.

1)Replaced Inner Front Door Key Pad Completely (New Key Pad, New Wire Harnesses and Used New Static Shock Wiring Harness. Re-Wired, Programmed and Tested Key Pad. *** All systems Normal and Reset *** 2)Replaced Foyer Vestibule Key Pad Mother Board and Installed Static Shock Wire Harness. Programmed and Tested ***All systems Normal and Reset *** 3)Replaced Door Contact on Inner Front Door. Wired and tested.

Camp M.

Repaired the horn strobe by the technology room exit door.

David H.

Austin C.

Brandon F.

Art L.

Fire Door Service Call

Russ F.

Wet Basement storage: Install the missing Inspection Test Valve sign and provide proper identification. Valve identification is beneficial in at least three ways. It allows the fire department personnel to locate and operate the valve. A contractor can readily shut off the system to make modifications. And system valves can be easily identified during periodic inspections. NFPA 13 (6.7.4.1) All control, drain, and test connection valves shall be provided with permanently marked weatherproof metal or rigid plastic identification signs. Wet Basement storage: Remove and replace the outdated water gauge. Pressure surges are typically trapped in the system by the check valve. Readings from these gauges can be used to establish a database on the available pressure in the water supply. The gauge on the supply side is also used during the main drain test to establish a database of residual pressure in the water supply. NFPA 13 (8.17.3) & NFPA 25 (13.2.7.2) Gauges shall be replaced every 5 yea

Camp M.

Installed new cellular communicator.

Brandon F.

Alex R.

Completed Annual Fire Alarm Inspection for 2019

Brandon F.

Tyler H.

back plate is rusting on smoke detector that I just programmed the head for Point 19. I showed Demonte the rust forming,there will be issues in the near future with 19. I suggest it's replaced before troubles arise. customer had water damage in the area - repair

Mike R.

Annual Fire Alarm System Inspection

Alex R.

New 12 volt Power Supply Installed 1-17-19 ALR For Interior Key Pads ***All systems Normal and Reset ***

Matt S.

Annual Fire Extinguisher Inspection (53 FE)

Art L.

Annual Fire Extinguisher Inspections (10 units) Annual Load Testing Emergency Lighting Inspection (21 units)

Jason Z.

Alarm Systems Inspection

Russ F.

Wet: Remove and replace the outdated water gauge. Pressure surges are typically trapped in the system by the check valve. Readings from these gauges can be used to establish a database on the available pressure in the water supply. The gauge on the supply side is also used during the main drain test to establish a database of residual pressure in the water supply. NFPA 13 (8.17.3) & NFPA 25 (13.2.7.2) Gauges shall be replaced every 5 years. Wet: Install (2) missing spare sprinkler heads in the spare head box. NFPA 25 (5.4.1.5) A supply of at least (6) spare sprinkler shall be maintained on the premises so that any sprinklers that have operated or been damaged in any way can be promptly replaced. Wet: Perform 5-year Hydro-Static test on the Fire Department Connection (FDC). Also perform the 5-year internal inspection of the FDC. NFPA 25 (13.7.4) The piping from the fire department connection to the fire department connection check valve shall be hydro-statically tested at 150psi (10 ba

Tyler H.

Mail replacement smoke to customer to install

Sean W.

Art L.

Portable Extinguishers and Emergency / Exit Lights Inspection

David H.

Tyler H.

Annual Fire Alarm Inspection (106 devices) (Fike-Cybercat 1016)

Brandon F.